汽车排气分析仪 排气分析仪 汽车排气检测仪 型号:NTP1-HPC201
主要功能特点:
用于测量汽车排放废气中的HC及CO气体浓度,采用国外先进技术,进口关键零部件组装而成。具有高亮度数码显示,自动校零,自动数据线性化处理,气路阻塞时自动报警,故障时自动诊断所在单元,打印测试之日期、时间功能,配内置打印机(或模拟输出接口或RS-232A数字串行通信接口),可进行自由怠速和双怠速测量,具有操作方便,测量数据准确,工作稳定可靠等特点。
主要技术参数:
测量范围 HC:0~10000×10-6(ppm)vol
CO: 0~10 ×10-2(%)vol
示值误差 HC±12 ×10-6(ppm)vol(绝对误差)或±5%(相对误差)
CO±0.06×10-2(%)vol (绝对误差)或±5%(相对误差)
稳定性 自动校零,量矩漂移≤±3%
重复性 重复误差≤±2%
分辨率 HC:1×10-6(ppm)vol
CO: 0.01×10-2(%)vol
响应时间 95%响应不大于10秒
预热时间 8min(可预热3min应急检测)
输出方式 数字直读显示,可附打印机打印气体名称,浓度最大值、平
均值、最小值,测试时间、日期等。可附接口与计算机联网
环境条件 温度0~40℃,相对湿度≤90%
电源 AC100-240V 50Hz 或DC12V(选加电源逆变器)
消耗功率50VA
外形尺寸 420mm(长)×310mm(宽)×170mm(高)
重量 约9kg
Main Features:
Used to measure vehicle emissions of HC and CO gas concentrations, using advanced foreign technology, import the key components assembled. With a high-brightness digital display, automatic zero, linear automatic data processing, auto-alarm when the gas line blocking, fault diagnosis where the unit automatically and print testing date, time functions, with built-in printer (or the analog output interface or RS -232A digital serial communication interface), can be freely idling and dual idling measure, with easy operation, accurate measurement data, work stable and reliable characteristics.
Main technical parameters:
Test Scope:HC:0~10000×10-6(ppm)vol
CO:0~10 ×10-2(%) vol
Shows the value error:HC ± 12×10-6(ppm)vol (absolute error)or± 5% (relative error)
CO± 0.06×10-2(%) vol (absolute error)or± 5% (relative error)
Stability: Automatic zero, volume moments drift ≤ ± 3%
Repeatability: Repeat error ≤ ± 2%
Resolution: HC:1×10-6(ppm)vol
CO:0.01×10-2(%) vol
Response Time:95% of the response to no more than 10 seconds
Warm-up Time:8 min(May the preheating 3min urgent examination)
Output Mode:Digital direct-reading show that gases can be attached printer name, the
concentration maximum, average and minimum test time, date, etc.. Can be attached to interface with the computer network
Environmental conditions:Temperature 0 ~ 40 ℃, relative humidity ≤ 90%
Power:AC100-240V 50Hz or DC12V (select plus power inverter) Power
consumption 50VA
Dimensions:420mm (length) × 310mm (width) × 170mm (H)
Weight:About 9kg
www.51658042.com